Adaptive repetitive control to track variable periodic signals with fixed sampling rate
journal contribution
posted on 2017-12-06, 00:00authored byZhenwei Cao, G Ledwich
Recent research has shown that the repetitive control is very efficient in tracking periodic signals, where it is required that an integer number of samples in each period. However, in some industry applications where the signal period varies but other requirements force a fixed sample rate, the number of samples per period may be a noninteger. To address this problem, this paper presents a new adaptive repetitive control, which deals with the noninteger samples per period due to the fixed sampling rate. The proposed adaptive repetitive control consists of two portions, the repetitive controller and the nominal controller, where the former uses a fictitious sampler operating at a variable sample rate maintained at multiple times of the signal frequency and the latter uses a fixed sampling rate. Interpolations are utilized to generate the fictitious samples required for the repetitive learning. The nearly perfect tracking has been achieved for noninteger samples per period, when a simple linear interpolation is used. The error due to the interpolation is quantified, which is negligible to the residual tracking error. The comparison of the proposed and the existing schemes shows the significant mprovement on the tracking performance. The experimental results on the control of a servomotor demonstrate the effectiveness of the proposed schemes as well.
Funding
Category 1 - Australian Competitive Grants (this includes ARC, NHMRC)
History
Volume
7
Issue
3
Start Page
378
End Page
384
Number of Pages
7
ISSN
1083-4435
Location
United States
Publisher
IEEE
Language
en-aus
Peer Reviewed
Yes
Open Access
No
External Author Affiliations
James Goldston Faculty of Engineering and Physical Systems; Queensland University of Technology;