CQUniversity
Browse

Study of combustion and emission characteristics of fuel derived from waste plastics by various waste to energy (W-t-E) conversion processes

conference contribution
posted on 2020-10-21, 00:00 authored by MA Hazrat, Mohammad RasulMohammad Rasul, Mohammad KhanMohammad Khan, Md Hazrat AliMd Hazrat Ali
Reduction of plastic wastes by means of producing energy can be treated as a good investment in the waste management and recycling sectors. In this article, conversion of plastics into liquid fuel by two thermo-chemical processes, pyrolysis and gasification, are reviewed. The study showed that the catalytic pyrolysis of homogenous waste plastics produces better quality and higher quantity of liquefied fuel than that of non-catalytic pyrolysis process at a lower operating temperature. The syngas produced from gasification process, which occurs at higher temperature than the pyrolysis process, can be converted into diesel by the Fischer-Tropsch (FT) reaction process. Conducive bed material like Olivine in the gasification conversion process can remarkably reduce the production of tar. The waste plastics pyrolysis oil showed brake thermal efficiency (BTE) of about 27.75%, brake specific fuel consumption (BSFC) of 0.292 kg/kWh, unburned hydrocarbon emission (uHC) of 91 ppm and NO x emission of 904 ppm in comparison with the diesel for BTE of 28%, BSFC of 0.276 kg/kWh, uHC of 57 ppm and NOx of 855 ppm. Dissolution of Polystyrene (PS) into biodiesel also showed the potential of producing alternative transport fuel. It has been found from the literature that at higher engine speed, increased EPS (Expanded Polystyrene) quantity based biodiesel blends reduces CO, CO 2 , NOx and smoke emission. EPS-biodiesel fuel blend increases the brake thermal efficiency by 7.8%, specific fuel consumption (SFC) by 7.2% and reduces brake power (Pb) by 3.2%. More study using PS and EPS with other thermoplastics is needed to produce liquid fuel by dissolving them into biodiesel and to assess their suitability as a transport fuel. Furthermore, investigation to find out most suitable W-t-E process for effective recycling of the waste plastics as fuel for internal combustion engines is necessary to reduce environmental pollution and generate revenue which will be addressed in this article. © 2016 Author(s).

History

Editor

Ali M; Salam Akanda MA; Monjur Morshed AKM

Start Page

050038-1

End Page

050038-7

Number of Pages

7

Start Date

2015-12-18

Finish Date

2015-12-20

eISSN

1551-7616

ISSN

0094-243X

ISBN-13

9780735414129

Location

Dhaka, Bangladesh

Publisher

AIP Publishing

Place of Publication

Melville, NY

Peer Reviewed

  • Yes

Open Access

  • No

Era Eligible

  • Yes

Name of Conference

11th International Conference on Mechanical Engineering (ICME 2015)